Radici Compounds AC270GR12WL
乙缩醛(POM)共聚物
Radici Plastics USA, Inc.
Technical Data
产品说明
AC270GR12WL is a high flow acetal copolymer reinforced with 12% glass fiber, coupled to achieve optimum adhesion at the glass fiber/polymer interface, and UV stabilizers added to the compound to improve its resistance to weathering. This results in outstanding strength and rigidity, maintained even at higher temperatures, combined with excellent practical toughness. Incorporation of glass fiber also further improves dimensional stability over a broad temperature
range.
Acetal copolymer is a highly crystalline engineering thermoplastic based on trioxane, polymerized with a comonomer to provide exceptional thermal stability both in processing and for molded parts, which may be exposed to high temperature environments.
As with AC90 the base polymer, AC90GR25WL exhibits excellent resistance to the effects of a broad range of chemicals, oils, solvents and greases, as well as very low moisture absorption.
AC90GR25WL should be considered for applications, that require resistance to UV exposure and need strength and rigidity, especially at high temperature.
总体
材料状态 • 已商用:当前有效
资料 1 • Technical Datasheet (English)
Search for UL Yellow Card • Radici Plastics USA, Inc.
供货地区 • 北美洲
填料/增强材料 • 玻璃纤维增强材料, 12% 填料按重量
添加剂 • 紫外线稳定剂
• 尺寸稳定性良好 • 抗紫外线性能良好 • 热稳定性,良好
• 刚性,高 • 耐化学性良好
性能特点 • 高强度 • 耐气候影响性能良好 • 韧性良好
• 高温强度 • 耐油性能 • 吸潮性差
• 抗溶解性 • 耐油脂性能
物理性能 额定值单位制 测试方法
比重 1.48g/cm³ ASTM D792
收缩率 - 流动 (3.18 mm) 0.60 到 1.4% ASTM D955
吸水率 (24 hr) 0.25% ASTM D570
机械性能 额定值单位制 测试方法
抗张强度 (屈服) 68.9MPa ASTM D638
伸长率 (断裂) 3.0 到 4.0% ASTM D638
弯曲模量 3790MPa ASTM D790
弯曲强度 103MPa ASTM D790
冲击性能 额定值单位制 测试方法
悬壁梁缺口冲击强度 (3.18 mm) 37J/m ASTM D256
硬度 额定值单位制 测试方法
洛氏硬度 (L 计秤) 84 ASTM D785
热性能 额定值单位制 测试方法
热变形温度 (1.8 MPa, 未退火) 154°C ASTM D648
熔融温度 165°C ASTM D789
注射 额定值单位制
干燥温度 93.3 到 104°C
干燥时间 3.0hr
建议注入量 40 到 70%
螺筒后部温度 210°C
螺筒中部温度 204°C
螺筒前部温度 204°C
加工(熔体)温度 193 到 227°C
模具温度 93.3 到 116°C
1 / 3 文件号: TDS-133603-zh
Radici Compounds AC270GR12WL
乙缩醛(POM)共聚物
Radici Plastics USA, Inc.
注射 额定值单位制
背压 0.345MPa
螺杆转速 40 到 80rpm
垫层 3.18 到 6.35mm
备注
1 通过这些链接您能够访问供应商资料。我们尽量保证及时更新资料;不过您可以从供应商处了解最新资料。
2 一般属性:这些不能被视为规格。
|